Hi-Point Target - cool looking aftermarket stock | Cool Ranged Weapons | Pinterest | Pain d'epices, irudivupic.web.fc2.com and Forum

I have a nasty habit. Well, quite a few, the truth be told, but one that pertains to firearms seems applicable here on TTAG. You see, I like matching pistols with rifles. Henry lever gun in. I even made a black powder.

So you can probably foresee my dilemma when I was blessed enough to pick out a Remington R1, series 80 M a few years back.

Or, wife-allotted budget, as it were. So, one day I am browsing the LGS on the other end of town, and hefted one of the stout, solid beasts by some folks out of Ohio. Beemiller is the owner of the High Point brandwhich I had barely heard of, except as makers of some arguably hideous looking pistols. But this shop had an array of these carbines in 9mm.

This posed a bit of a psychological dilemma. I had more recently picked up a Ruger P95 at a gun show for a great price, and still had the recent purchase tingle.

I opted for the. Bag the debate, the had been waiting longer, so with my CPL firmly in hand, the. I was only able to empty the three mags that came with the purchase before I was thoroughly drenched. The very next weekend was much more settled on the weather front, so I went back out with a buddy and his grandson. I also scrounged through my ammo cans and loaded up some old lead rounds from a different shooting friend, who knew who had reloaded them.

Ammunition from a friend of a friend should be torn down and used for their basic components, but I figured a trigger is a much quicker and more efficient way of unloading suspect rounds. It cycled out the last brass, so I popped out the magazine and set it aside to fire one of the other aforementioned firearms.

On trigger squeeze, even I noticed the odd noise emitted, and saw no puff of dust. Blown barrel back at the bench. After looking down toward the front sight, sans cover, at the gaping hole, I knew we had a problem, Houston. It took about a week to recover from the shock, then I started looking around for replacement barrels and covers, etc. Being in the AR camp, I was stunned at how little there is out there for after-market barrels. Like none, so I shot an email out to Beemiller, requesting a price.

They replied back that I should give them a call. I did, and was flabbergasted by their response:. That weekend I went back to the scene of the crime, and ensured I put over rounds through it, and all MY reloads.

Ran like a champ, and I was in perma-grin mode.

Hi-Point Carbine - Wikipedia

The weather has gone the way it tends to do the last few months, so not much shooting was done, but I found a pleasant enough weekend, to schlep some shooting irons out to another of my usual haunts, which is a touch more formal, but only a touch. The important things are the measured range lanes, rustic tables with benches, and a roof! From 50 foot pistol to yards. Above is a picture of the ranges, with a couple of foot stations for pistol practice, all the way out to the yard buffalo gong, and beyond.

I had probably fired another hundred or slightly more rounds since the big break-in with round after barrel replacement, and it never missed a trigger pull.

But this was the first time I tried for any measurable accuracy. The center target was adorned with a few targets, some site-ins, and the requisite all black one, designated by the TTAG guidelines. Black holes on a black target are hard on a spotter.

The first round mag on spotting targets seemed fairly well inside the minute-of-badguy realm I was hoping for. Sight in, 10 rounds. But this was never meant to be anything remotely approaching a sniper rifle, especially with a pistol caliber cartridge making the yard walk at around fps. So I loaded up five rounds in each of the three magazines and took aim at each of the black targets.

Here is the best one:. Could fit under a Quarter. Firing the aforementioned Remington, with its comparatively diminutive 5-inch barrel, was able to mark targets similarly. I had hoped it would be a bit tighter grouper than this at a bit further useful range than the but preliminary accuracy testing is not proving that out. But I bought it as a match to make a set, and a heavy pinker, as half my collection is gathering dust with the scarcity of.

All-weather, black molded polymer Weight: Adjustable peep sight MSRP: But, as the longer barrel should build a bit more velocity and spin, I had hoped for better. If there is a round in the chamber and the safety is off, it will go boom. If there is a round in the magazine, it will feed. No malfunctions experienced at all when the correct ammo is present. Two levels of lower, and one of upper.

As to other third party items like barrels, compensators, or triggers, there are none that I could find. The fact that it goes bang every single time, was also a huge plus. With this price point, and overall solidity, it is a fine firearm. Seriously, you blew the barrel thru your own tomfoolery and they still stood good on the damage. My wife blew up my Walther P The Walther was YEARS out of warranty, and not only did they fix it free of charge, but they also upgraded the slide because they were out-of-stock on the regular one.

For their part, Remington refunded me the cost of sending their ammo in to them, AND the cost of sending the pistol to Walther, and for all my troubles, sent me about rounds of. It seems the only industry with any sense of customer service is the gun industry. Nonetheless, good on Hi-Point for replacing it for you. Next time, pay more attention when you reload AND shoot. I bought a bersa bp9cc secondhand that arrived with a bum trigger safety that they fixed for free for me.

Even knowing it was a secondhand purchase. Yes, a great company! Finding this out, when sending back, my Millenium, PT. The only difference was that the Taurus barrel just bulged and locked the action permanently as far as I could tell. Taurus sent the gun back with a new barrel in a couple of weeks, no charge, and the gun operates as new.

I own two hi point carbines the and the for the reason that I have. Sometimes all you need is cheap and reliable, and Hi-Point fills that role well. Add in their apparently stellar customer service and they suddenly become a pretty good option for someone on limited funds.

I like the old Haskell handguns made of metal — but they had their drawbacks as well weight and ugly. Try some lighter weight ammo.

The twist rate may not be sufficient to stabilize a grain pill over 50 yards. Rate of Twist is 1: The idea of having common chamberings between your handgun and carbine is an Old West tradition and still a good Tips for day trading penny stocks idea. BTW, a Pakistani shopkeeper thwarted a robbery about with his 9mm Hi Point carbine.

The would-be thief all but crapped himself and waited for the cops while getting a Muslim lecture against crime. Also, quick way to get money on animal crossing ds to fama 1965 the behavior of stock-market prices Hi-Point backs up their products. Had a scope on the gun too.

At what range were these targets shot? I have owned a few High points and they were hell for strong, more accurate than some of my hi end firearms because of the pinned barrel. Ugly as sin yes, Heavy but it is a blow back design does it function yes! My 9 has about rounds through it and holds minute of bad guy, problems! As to loadings, 6. I have a friend who runs a range. They rent out hi point carbines.

After a few years and probably 50, rounds in service, his guns were starting to get a bit unreliable. So he called the company and confirmed he could mail them in for a refurb. After all the rental use, he fully expected to pay for any refurbishment. To that end, he included his contact info with a note to call him for a CC number. To his astonishment, about 10 days after he mailed the carbines out, he received a box from hipoint containing 2 totally refurbished carbines.

Pretty much everything play for free binary options demo account no deposit for the slide itself, the barrel and the frame were replaced.

All the fire control parts, all the small bits dead frontier best class to make money the bolt, and a bunch of other items had been replaced. How they manage to offer service that puts many high dollar gun companies to shame, is beyond me.

But they hi point 995ts aftermarket stock it. I suspect that Hi-Point Beemiller Inc. This would allow for higher profits and better service. I looked for stock links, but came up flat. Hi-point needs to be delivering at minimum 30 which slot machines have the best odds fire red mags.

You might as textile stocklots buyers stick with the handgun instead of lugging around all that extra plastic and metal for almost no benefit.

Either you have no idea what you are talking about. Or you have been proficient with a pistol long enough to have forexometro boss how difficult it is to shoot a handgun effectively when you are new at it.

In contrast, a light recoiling carbine with a dot sight is something that even a first time shooter can hit with. The reality is that a little carbine like the Hi Point may not be any more mechanically accurate than a nice revolver or custom But its practical accuracy is going to be much greater simply because it is a long gun. A carbine allows for more points of contact to assist in stabilization. I suspect the magazine limitations may be to cater to the less than fortunate souls in slave states along with the price point.

Honestly, these firearms should be marketed heavily to those on a fixed or very low income. They make ideal HD weapons for those that cannot afford to buy anything even midrange in the market, and cannot handle the recoil or noise of a shotgun. Read below that the reason for the lower capacity is: I have a 9mm carbine with the pro pack.

Yes, the gun has a 10 shot magazine. But it has two more magazines in the stock giving you 31 rounds on board the rifle. My wife cannot handle a shotgun. She is not very good with a pistol. But she can roll a self healing ball across the field up to around hi point 995ts aftermarket stock yard with the carbine. Hidden in our safe room my wife is very secure with the carbine in hand.

This has been on my radar but probably in 40 the ballistics are fantastic and 40 is cheaper and always available. Also good to hear about the great customer service too. Although I would take a Taurus over a Hi-Point pistol every time.

Golly gosh best fx trading platform for mac I have had 5 TAURI that worked flawlessly. Including a used I have first hand experience with a Taurus J frame knock off revolver that locked up solid after firing its first shot.

So we profitable strategy for binary options megatrayder to bring it to the shop where we purchased it fully loaded. He was eventually able to get it open so it could be sent to taurus for repair. The superindikator binary options did my friend, the owner, a nice favor by taking the gun back and offering him full credit towards any other gun.

I had the earlier uglier? Still looking for an old-style planet of the apes looking version!

BTW, the problem with the H-P. I find that slapping the back of the mag against my hand before inserting it solves most of this. These are ,57 with free delivery at GunBuyer. They are the internet part of Florida gun exchange.

I have the same carbine for over two years now. As you stated the iron sights are lousy. I put a Mid priced Tru-Glo red dot on it. I average inch groups at 50 yards. I now use RN from Black Bullets International over 4.

I bought it for home defense and it fits the bill. While I did find removing the rear iron sights somewhat of a binary search tree program in c source code. I have the 9mm to go with my Hi Point 9mm and. Thats has to be the single ugliest gun known to man. I and I have a reputation for liking ugly guns. To me at least ugly seems like kind of a dumb qualifier for a gun.

Custom 'Stormtrooper' Hi-Point 995TS 9mm Carbine

Anyone that cares about fashion when talking about guns is a mystery to me. You know I may actually pick one of bollinger bands fibonacci ratio up in 9mm to go with my CZ Both trips resulted in a free dax futures interactive brokers from her for each repair instance trading range-bound markets in forex the gun now works fine.

Otherwise, for the money, no complaints. They are what they are…. Too much zinc in theirs I guess. Like the concept in a lighter package. Even a single-shot 12 gauge weighs 5 lbs. Not sure it gets much lighter than that in long guns. I really wish you had used factory ammo in your accuracy testing. That said, a pistol caliber carbine begs for customized ammo.

As mentioned, experimenting with different bullet weights would also be worth a shot. Capacity aside, they are darn nice home defense guns: Fairly rare and spendy.

Stinkeye, the is now custom, as I do a little gunsmithing and brought it to Series 70 so I could replace the trigger to adjust it. Now it is about 2 lbs, no creep, low reset. And my next match is to be a Rossl in Stainless with a. Lastly, Curtis in IL, the only factory loadings I have currently are jacketed hollow points, which I feared would tumble even more. I will be sure to use a name brand when I review the Bacon Maker, which I hope to win here shortly!

Were you using lead bullets on those reloads. My leaded up the barrel with cast bullets accuracy went from very good with FMJ to shotgun with cast.

If you want to add extra utility to your Hipoint, there is an after market magazine catch for magazines. I bought a 9mm a couple years back. It was always reliable but I decided to trade it. I bought a TS as a first gun while waiting to decide on a handgun.

My understanding is that 9 mm is flat out to 70 yards or so. I have yet to do the take-apart cleaning, but clean the barrel and chamber after use, so hopefully the innards are not too bad. So think I will keep them all! I wanted a cheap HD rifle that I could share cheap ammo with my side-arm. Did some research on the net and up popped this Hi-Point S.

Gun show hit town. One booth had 1…and only 1. Went to Hi Point site and ordered some accessories like the dual stock clip-holder, forward folding grip, and the muzzle compensator Weaver rails everywhere to mount stuff.

Took her to the range and ran a rounds through it. Since that time I have put a few thousand rounds through it. Happy to say no problems so far. Perfect gun for HD at the asking price.

The with red dot, laser, and two extra mags on the stock is my go to home defense and I feel very confident In this weapon for that purpose.

So far hundreds of rounds with no problems using a wide variety of ammo. I tend toward round ball ammo as I feel that it will stop any threat at yards. I would grab my AR for longer shots, for sure. Talked to CS lady at Hi Point a few days ago and mentioned the 9 round limit on the carbine and JHP 45 pistol. She said that the company is working on higher capacity mags. Also indicated that use of pro mag hi capacity mags could void their generous Warrenty.

I am confident that when they have a reliable high capacity magazine it will be made available to the buying public. Eats everything, gr feels only slightly snappier than gr. Accurate, reasonable price, outstanding American service, not a looker. Sounds like a Ford Model T. I was disappointed by the accuracy of my Hi-Point. And that was with a scope. So I slugged the barrel. Turns out it is closer to.

This also answered the question why some grain bullets were much faster than other grain bullets using the same load. The first shot is sometimes dead on, but as the barrel heats up, the point of impact starts drifting down and to the left in a straight line.

It actually makes one of the quietest home defense guns you can name. Much quieter than any pistol, shotgun or. Hey Jim, Thanks for the info. Would you be willing to let Hi-Point CS know about what you have discoveres?

Like Ian, I am also very curious for the same reason. I am an FFL. While selling Colts, Smiths, Ruger. Taurus, Springfields, Bersa, Beretta, and many others, Hi Point is the most consistent seller in the shop. Many return for other Hi-Points. Many who do dog them, never fired one. My local gunshop sells these carbines and he told me one of his customers was using it as a tractor gun.

He was bush hogging and it fell off and got chopped up by the bush hog. He sent it in to Hi-point and they gave him another one. I bought a Hi-Point about a year ago. About 6 months into it-I started having FTE, FTF problems. Brown, sent it in-it came back in 21 days-no charge-It is fantastic-goes Boom every time-and always has been outstanding in accuracy. I have a TS, I love it! I sighted it in at 50 yards with gr FMJ. Got a Moa the size of a half dollar.

I dropped a big doe this last Sunday at 50 yards. One shot to the vitals dropped her where she stood. Great carbine at an affordable price. It love gr FMJ and hollow points. The company owner Beemiller states himself the. The just out this year has not had enough side by side comp shooting to determine but I would assume it would be more accurate than the.

Sadly Beemiller is selling the company lets hope the new corporate owner maintains the same customer service standards Hi-Point has established. I have the and it is a tack driver at yards. I got an ati stock for it and love it even more.

When I hear people run them down I figure it is a gun snob or someone who has never fired one. Your email address will not be published. Notify me of follow-up comments by email. Notify me of new posts by email. Menu Gun Reviews Gear Reviews Guns for Beginners Hunting Facts About Guns. Hi-Point TS Pro Carbine. December 25, 83 comments. Hi-Point TS Pro Carbine jwm says: December 25, at Kudos to Hi-Point for outstanding customer service. February 26, at December 26, at June 2, at April 30, at Ruger has stood by me through several idiotic shenanigans.

And yeah, I am still blown away by their turn-around time, and overall CS. Hi-Point is ugly as hell but at least they work. There is just a little too much plastic for my tastes.

It is ugly, but very functional. Oh yeah, All I found was a rock in my stocking. And it was made of silicon, not carbon. James T Kirk says: March 15, at Tom in Oregon says: That is terrific customer service. If you really want a match for your pistol, find a Marlin camp.

It takes the same mags. Maybe more range time for break-in is required. Don from CT says: How about Zero dollars. That saidit does look like customer service and reliability are positive notes for hi-point.

Stinkeye, Either you have no idea what you are talking about. I can shoot my crappy KelTec Sub better than I can shoot my Brazos limited Johnny B Goode says: March 4, at Former Water Walker says: I think I will stick to my CX4. February 19, at My former boss got a. I wonder if a barrel swap would make it a 9mm? I love my TS. April 14, at Well-told story and good accompanying pictures. Curtis in IL says: Aaron, thanks for the review.

Try some lightweight ammo grains instead of to take advantage of the longer barrel. Also, are there any pistol caliber carbines that take CZ mags?

Pistol in question is a CZ SP First off, thanks for all the kind comments, they are very appreciated. December 28, at January 6, at February 27, at June 7, at July 24, at Hipsters complain the recoil plate pulls their facial hair. August 9, at August 25, at October 12, at October 30, at November 6, at December 24, at December 29, at January 13, at January 19, at I gotta keep the matching alive!

May 20, at Leave a Reply Cancel reply Your email address will not be published. Read TTAG In Your Language: Merry Christmas from TTAG. Question of the Day: Whadjya Get for Christmas?

Avatars by Sterling Adventures. Resources and links About Us Advertise Contact us. Privacy Policy RSS Feed Write For Us.